Quantum DX100 User Manual page 23

DX Model Number of
(with Drive Storage
Size) Arrays
DX30 (500 1 to 4
GB drives)
DX100 (500 2 to 16
GB drives)
Quantum DX-Series User's Guide
Number of Tape Number of
Drives Cartridges
Up to 30 virtual 320 cartridges
DLT7000 drives per storage
array (1280
max)
Up to 55 virtual 320 cartridges
DLT7000 drives per storage
array (5120
max)
The ATL P1000 library emulation is an inquiry string only and
Note:
can be configured via the remote management interface (see
Chapter 3 on page 33). The ATL P1000 was selected because it
operates with all backup applications allowing the DX-Series
system to integrate seamlessly in a data center.
The DX-Series storage array is shipped with the following
Note:
RAID configuration:
•1 logical drive configured in RAID 5 (7 data drives + 1 parity
drive)
•1 logical drive configured in RAID 5 (6 data drives + 1 parity
drive)
•1 global hot spare drive
To reconfigure the DX-Series storage array to either remove
the hot spare or add an additional hot spare (total of two hot
spares), contact Quantum customer support (see
Support on page xvii). Reconfiguring the storage array RAID
configuration will cause all previously stored data to be lost.
Both the DX30 and the DX100 use the same system components
(controller and storage arrays). The DX100 storage arrays, however,
contain dual RAID controllers and the overall DX100 system can expand
to sixteen storage arrays. The DX100 controller also has a full compliment
of Fibre Channel HBAs (two quad port HBAs and four dual port HBAs)
Chapter 1 DX-Series System Description
Usable Capacity
Usable (with 2:1
Capacity Compression)
6.5 TB to 26 13 TB to 52 TB
TB
13 TB to 26 TB to 208 TB
104 TB
DX-Series System
Customer
4