Table of Contents
Advertisement
Deployment under Windows CE 6.0 Prof.
Installation of the optional MPI/PROFIBUS DP interface
4.2 Installation of the optional MPI/PROFIBUS DP interface
Installation
44
CAUTION!
Personnel and instruments should be grounded when working on electro-
static sensitive modules! Take the interface module only at the holding
plate and avoid touching the board! Store respectively send the interface
module always in the corresponding ESD packaging!
1.
Remove the cover plate of the COM3 port by removing the screws and pulling the
plate.
2.
For installation insert the interface module into the opening. Push the interface
module in the device until the holding plate fits to the housing. Here the interface
module is put into the right position by 2 inner guide rails.
HB160 | TP-ECO | 62K-NHC0 | en | 17-09
VIPA HMI
Advertisement
Table of Contents
