YASKAWA VIPA TP-ECO Manual page 14

Hide thumbs Also See for VIPA TP-ECO:
Table of Contents

Advertisement

Hardware description
Structure > Interfaces
RS232 interface
MPI/PROFIBUS DP inter-
face (optional)
Ethernet connection
"Host"-USB-A
Power supply
14
9 pin SubD plug
n
Interface is compatible to the COM interface of a PC
n
Logical signals as voltage levels
n
Point-to-point links with serial full-duplex transfer in two-wire technology up to 15m
distance
n
Data transfer rate up to 115.2kbit/s
9 pin SubD female
The two RJ45 jacks provide the interface to the twisted pair cable, required for Ethernet.
Please note that these two Ethernet interfaces cannot be used as a
Switch!
Using the "Host"-USB-A interface USB mouse, keyboard, stick or USB hard discs can be
connected.
The Touch Panel has got an integrated power supply. The power supply has to be pro-
vided with DC 24V (20.4 ... 28.8V). For this you find an according DC 24V slot at the
back. The power supply is protected against inverse polarity and overcurrent.
HB160 | TP-ECO | 62K-NHC0 | en | 17-09
VIPA HMI

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vipa tp 610lc62k-nhc062k-nhc0-dh62k-nhc0-cbTp 610lc

Table of Contents