Table of Contents
Advertisement
VIPA HMI
List released resources
Connect net drive
Example:
Configure network printer
Test print
List network connections
HB160 | TP-ECO | 62K-NHC0 | en | 17-09
n
Shared resources of a network PC can be listed by the command: \> net view PC-
Name
n
For example net view testserver lists all shared resources of the network PC
"test server". To test the physical connection a PING to the IP address of the network
PC may be executed if there are problems while contacting the network PC.
The connection of a local name at the Touch Panel with a shared drive of the network PC
happens with the following approach:
1.
Enter the following in the command prompt: \> net use local_name \
\network drive /user:User name
2.
Enter user name, password and where app. user group.
ð After successful login the following message appears: 'Successfully mapped to
network name' .
The connected network drive is then available on the Touch Panel with the
local_name via My Device at Network.
Local_Name: data, network drive: testserver\archive, Username:guest
Input: \> net use data \\testserver\archiv /user:guest
The connected network drive is then available via \network\data at the Touch Panel.
The configuration of a network printer happens with the following approach:
1.
Enter this command into the command prompt: \> net use printer name network
printer
Example:
Printer name: Printer, network printer: \\testserver\printer
Entry: \> net use printer \\testserver\printer
2.
Enter user name, password and if necessary user group.
ð After the successful login the following message appears
Successfully mapped to network printer
The printer may now be accessed as "network\printer".
For example you may print the content of the current directory using \> dir > network
\printer.
The listing command for all network connections of your Touch Panel is \> net use
Deployment under Windows CE 6.0 Core
Access to the network resources
41
Advertisement
Table of Contents
