Table of Contents
Advertisement
VIPA HMI
Settings
Info/Update (firmware)
Autostart
HB160 | TP-ECO | 62K-NHC0 | en | 17-09
In [Settings] the system settings like brightness and contrast of the display can be preset
or the display can be re-calibrated. Here the MPI/DP slave interface can also be config-
ured. Further you get here the Touch Panel information: product number, serial number
and licenses.
n
To execute the firmware update press the button [Info/Update]. After clicking on [Info/
Update] the current image is displayed under "image version" with panel name, crea-
tion date and version number.
n
With [Make Screen Shot] you can make a screen shot of the panel information and
select a destination for its storage.
With [Search Image] a list of all the firmware images is shown, which are available on
n
the panel and connected storage media. These images will be listed with create data
and version number. Choose your new image.
If the select image is not suited for your panel, an error massage appears. If the image is
suited for your panel, in the following message the current installed image version and
the new selected image version are listed.
1.
Click on [Make Image Update] to execute the update. This can take a few seconds.
2.
In the following window click on [Finish] to end the update.
ð Then the display gets dark.
3.
Switch the power supply off the panel off and on.
ð After the restart the calibration window is opened.
4.
Re-calibrate your panel as described. After calibration tap anywhere at the screen.
ð The calibration window is closed.
5.
Via 'Start è Settings è Control Panel' start the program AutoRunMaker.
Ä Chapter 3.4 'Installation Movicon and Startup-Manager' on page 28
With [Autostart] you define which runtime and which project will be started automatically
together with the panel startup.
Deployment under Windows CE 6.0 Core
Commissioning > VIPA Startup-Manager
27
Advertisement
Table of Contents
