Table of Contents
Advertisement
VIPA HMI
Demounting
HB160 | TP-ECO | 62K-NHC0 | en | 17-09
3.
Now press the interface module downwards until the holding plate snaps into the
lugs.
Please consider that the holding plate always snaps to the lugs,
otherwise the holding plate can not be screwed!
4.
Mount the screws again.
After installation the interface module is automatically recognized and can be configured.
1.
Remove the screws.
2.
Push the holding plate from the lugs. Use a screwdriver by inserting it gently
between the housing and holding plate.
3.
Pull the interface module out of the device.
4.
Reinstall the cover plate.
Deployment under Windows CE 6.0 Core
Installation of the optional MPI/PROFIBUS DP interface
25
Advertisement
Table of Contents
