Table of Contents
Advertisement
VIPA HMI
3
Deployment under Windows CE 6.0 Core
3.1 Installation
Overview
Installation cutting
Installation
Connect power supply
HB160 | TP-ECO | 62K-NHC0 | en | 17-09
The Touch Panel is suitable for the installation in operating tables and control cabinet
fronts. The installation happens via the back. The Touch Panel is provided with a
patented fixing technique that allows an easy connection with a hexagon socket key. A
fast and easy device change is possible.
For the installation into a operating tableau and control cabinet fronts, the Touch Panel
requires the following front plate cutting:
Touch Panel
62K-NHC0-...
For the installation of the panel, 4 mounting clips and a small hexagon socket key are
required.
1.
Push the operator panel [3] from the front side into the front panel cutting [1] until it
touches the panel with the seal [2].
2.
Put the mounting clips [4] on all four sides of the panel into the openings. The
screws should point in the direction of the front panel.
3.
Screw the screws from the other side with the hexagon socket key [5].
For the cabling of the DC 24V power supply a green plug is used. The connector is a plug
with screw contacts. The plug has the following assignment:
+
DC 24V
-
DC 0V
PE Protective earth
Deployment under Windows CE 6.0 Core
W x H in mm
311 x 249mm
Installation
23
Advertisement
Table of Contents
