YASKAWA VIPA TP-ECO Manual page 32

Deployment under Windows CE 6.0 Core
Operating system WindowsÒ Embedded CE 6.0 Core > General
Ò
Windows Embedded CE
6.0 Core
Properties
Differences to the
Ò
standard Windows opera-
tion
Navigation within the
dialog window
Ò
Exit Windows (shut
down)
32
Ò
Windows CE 6.0 Core is a Windows
tials with mouse operation (touch screen) that requires only small hardware resources.
n ftp and VNC server
n Registry Editor
n USB keyboard driver
n VIPA Startup Manager
Please note that for the deployment of Windows
Ò
Windows is assumed. Here are only shown the differences to a "standard" Windows
operating system.
n Pen entry
You're operating the Touch Panel by means of a pencil res. with the finger. When
touching an area at the touch screen this area is recognized and the program reacts
accordingly. The following types of entry are differentiated:
n Double click
A double click has to be executed like mouse operation by touching the area at the
screen twice. A double click on an object opens res. executes this.
n Drag
By tapping on an object and then dragging you may move the object on the screen. If
no object is selected, a frame is created by the dragging that selects the touched
objects.
The windows may be moved via the head bar. Here you may also find the [OK] button to
confirm entries and the [X] button for exiting the dialog.
You may not exit Windows
Ò
restart Windows . Before a reboot you should always save your data res. close all run-
ning applications to avoid data loss.
Please note that changes are stored automatically after 30 seconds. For
manual storage, please use the "suspend" function, to be found in the
start menu.
Ò
operating system reduced to the absolute essen-
Ò
CE a profound knowledge of operating
Ò
. By switching the power supply off and on again you may
HB160 | TP-ECO | 62K-NHC0 | en | 17-09
VIPA HMI
Ò