Table of Contents
Advertisement
Deployment under Windows CE 6.0 Core
Installation of the optional MPI/PROFIBUS DP interface
3.2 Installation of the optional MPI/PROFIBUS DP interface
Installation
26
CAUTION!
Personnel and instruments should be grounded when working on electro-
static sensitive modules! Take the interface module only at the holding
plate and avoid touching the board! Store respectively send the interface
module always in the corresponding ESD packaging!
1.
Remove the cover plate of the COM3 port by removing the screws and pulling the
plate.
HB160 | TP-ECO | 62E-MHC0 | en | 17-01
VIPA HMI
Advertisement
Table of Contents
