Panasonic KX-NS700 Feature Manual page 546

5.4.7 Flexible Numbering/Fixed Numbering
Some flexible feature numbers require additional digits to make the feature active. For example, to set Call
Waiting, the feature number for "Call Waiting" must be followed by "1" and to cancel it, the same feature
number should be followed by "0".
•
If a feature number includes " " or "#", rotary SLT users cannot use it.
•
ISDN extension users cannot use the following features:
–
OGM playback/record
–
Call Hold/Call Hold Retrieve (held at its own extension)
–
ISDN Hold
–
MCID
–
Walking Extension
–
Call Waiting
–
Hot Line
–
Timed Reminder
–
Executive Busy Override
–
Call Monitor
–
Automatic Callback Busy/CCBS
•
PS users cannot use the following features:
–
Personal Speed Dialling
–
OGM playback/record
–
S-CO Line Access
–
Parallel Telephone Mode set/cancel
–
Walking Extension
–
BGM set/cancel
–
Timed Reminder
PC Programming Manual References
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main
→Extension
→Features
→Other PBX Extension
10.6.2 PBX Configuration—[2-6-2] System—Numbering Plan—Quick Dial
10.6.3 PBX Configuration—[2-6-3] System—Numbering Plan—B/NA DND Call Feature
PT Programming Manual References
[100] Flexible Numbering
Feature Manual References
3.1.1 Unified Messaging System Overview
5.2.4.1 Portable Station (PS) Connection
6.1 Capacity of System Resources
Operating Manual References
5.3.1 Feature Number Table
546 Feature Manual