Panasonic KX-NS700 Feature Manual page 149

Carrier Access Code
® 16.5 PBX Configuration—[8-5] ARS—Carrier—Carrier—
Trunk Group : Assign the trunk groups which connect to each carrier and the priority in which they are
11
selected.
When using Web Maintenance Console, trunk groups can be assigned to a carrier using an on/off setting
for each trunk group. They can also be given a priority setting (1–4) which decides the order they are
searched when seizing a line. If there are no available lines in the trunk groups set to priority 1–4, the other
trunk groups set to on are searched in the order of smallest number first.
[Example]
Carrier
1
ABC 9
XYZ 12
® 16.5 PBX Configuration—[8-5] ARS—Carrier—TRG Priority
® 16.5 PBX Configuration—[8-5] ARS—Carrier—TRG 01–TRG 64
Modify Command : Assign the commands to modify the dialled number to access the carrier.
12
® 16.5 PBX Configuration—[8-5] ARS—Carrier—Carrier—
CLIP Table No. : Assign the CLIP number for the carrier. CLIP numbers are assigned according to the
16
CLIP Table No. assigned for the carrier.
® 16.5 PBX Configuration—[8-5] ARS—Carrier—Carrier—
[Command Explanation]
Command
Number
C
P
A
G
I
H
: Assign the code to access the carrier.
10
Priority Setting
2 3
3 1
4 None
Add the number.
Add the Carrier Access code.
Analogue Line: Insert a pause.
ISDN/E1 Line: Insert a pause and change to tone (DTMF) signal.
Add the Authorisation code for a tenant (
Add the Authorisation code for a trunk group (
Add the Itemised Billing code (
Add the dialled number after the digits are removed (Home position).
2.8.1 Automatic Route Selection (ARS)
Carrier Access Code
Trunk Groups
Set to On
4
7 5, 7, 9, 11
None 6, 10
Modify Command
CLIP Table No.
Description
).
15
Searching Order
9 ® 3 ® 1 ® 7 ® 5 ® 11
12 ® 4 ® 6 ® 10
).
13
).
14
Feature Manual 149