Operation; Basic Operation; Switch Display; Switch Phase - Mitsubishi Electric ME96SSHA-MB User Manual

5. Operation

5.1.

Basic Operation

The following explains basic usages during operation.

⚫ Switch display

By pressing , the measurement display will switch over.
By pressing
+
DISPLAY
Example of display switching(Phase wire System: 3-phase 4-wire,display pattern:
DISPLAY
<Screen 1 of 4>
Upper: Current
Middle: Active Power
Lower: Voltage

⚫ Switch phase

By pressing , the current phase and
the voltage phase will switch over.
Example of phase switching (Phase wire System: 3-phase 4-wire)
Current average
Active Power (total)
Voltage average (line to neutral)
Current phase 3
Active Power phase 3
Voltage phase 31
, the measurement display will switch over in reverse.
－
＋
－
＋
－
<Screen 2 of 4>
Upper: Current
Middle: Active Power
Lower: Power factor
Screen number display
Current phase 1
Active Power phase 1
Voltage phase 1N
Current phase 2
Active Power phase 2
Voltage phase 23
Display items and the order differ depending on the phase wire
method setting display pattern settings and additional screen.
For more information about detailed display patterns,
refer to pages 77 and 78.
DISPLAY
＋
<Screen 3 of 4>
Upper: Current
Middle: Power factor
Lower: Voltage
When switching screens, the left screen appears momentarily.
This screen indicates the number of the next screen being
displayed in the total number of screens.
The phase cannot be switched in the following cases.
・
Measurement elements without phase (Frequency)
・
Active power, reactive power, apparent power, and
power factor for settings other than 3-phase 4-wire
・
When the setting is 1-phase 2-wire
Current phase 2
Active Power phase 2
Voltage phase 2N
Current phase 1
Active Power phase 1
Voltage phase 12
63
P01, without additional display）
DISPLAY
＋
<Screen 4 of 4>
Upper: Current
Middle: Not displayed
Lower: N-phase current
Current phase 3
Active Power phase 3
Voltage phase 3N
Current average
Active Power (total)
Voltage average (line to line)