7
OPERATION EXAMPLE
Chapter 3 through Chapter 6 describe the settings and how to start the functions of the record, reproduction, and analysis that
are the three phases of the system recorder. This chapter describes examples of actual utilization of the system recorder.
7.1
How to Check the Recording Result
Replay the data sampled by the recorder module and video recorded by the camera to assume the error cause, and then dig
deep into it by analysis.
Operation details
The inspection process of a print circuit board is used as an operation example.
4.
General-purpose
personal computer
(Windows10)
Sensor
1.
Workpiece
Belt conveyor
1.
Workpieces flow on the belt conveyor.
2.
The sensor detects the flowing workpieces and measures their heights to judge them as passed or failed products.
3.
If any of the four causes are enabled, such as failed product generation and detection of multiple workpieces, a device
error occurs.
Device error cause
4.
The device error triggers the saving operation of the data sampled by the recorder module in the SD memory card and
video of the network camera in the general-purpose personal computer (Windows10).
3. 4.
Network
camera
2.
Workpiece
GOT
7 OPERATION EXAMPLE
7.1 How to Check the Recording Result
7
62