Setting Menu 3: Display Settings (Setting Maximum Scale, Active Energy Measurement, And Harmonic Display, Etc.) - Mitsubishi Electric ME96SSHA-MB User Manual

3. Setting
3.6. Setting Menu 3: Display Settings (Setting Maximum Scale, Active Energy Measurement,
This section shows how to set maximum scale in the bar graph, expanded counting, and harmonics display.
In the operation mode, press
becomes available.
DISPLAY
①Current maximum
scale
DISPLAY
②Voltage maximum
scale
DISPLAY
③Active power
maximum scale
DISPLAY SET
④Reactive power
maximum scale
DISPLAY SET
and Harmonic Display, etc.)
and simultaneously for 2 seconds or more, and the following operation
Set the current maximum scale.
If you have not set current to "Display pattern", this display menu will be skipped.
(1)Maximum scale value
Primary Current
(1.4.1Primary Current Setting value)
(2)Special current maximum scale
This display is displayed when you set the "SP" in 3.1.
+ 3 STEP (About 120%)
to
± 0 STEP (100% : Rating)
to
-10 STEP (About 40%)
Note: The maximum scale value becomes the value in the table on Section 6.3.(page 80 and after).
Set the voltage maximum scale.
If you have not set voltage to "Display pattern", this display menu will be skipped.
Maximum scale value
+10 STEP (About 250%)
to
± 0 STEP (100% :
Standard maximum scale
to
-18 STEP (About 20%)
Note: The maximum scale value becomes the value in the table on Section 6.3.(page 80 and after).
Set the maximum scale of Active power, Rolling demand.
If you have not set active power and rolling demand to "Display pattern",
this display will be skipped. And, if selected not Active power but rolling demand,
"(2)single deflection/ double deflection" will be skipped.
(1)Maximum scale value
+3 STEP (About 120%)
to
±0 STEP (100% : Rating)
to
-18 STEP (About 20%)
Note: The maximum scale value becomes the value in the table on
Section 6.3.(page 80 and after)
(2)single deflection / double deflection
single deflection
Set the maximum scale of Reactive power.
If you have not set reactive power to "Display pattern", this
The setting method is the same as ③active power maximum scale.
Reactive power is only "double deflection".
SP.(Special Setting)
value)
.
double deflection
display
will be skipped.
31
DISPLAY SET