Function Of Operation Buttons - Mitsubishi Electric ME96SSRB-MB User Manual

1. Name and Function of Each Section

Function of Operation Buttons

The function of each operation button varies
depending on how to press the button.
<Meaning of marks>
○: Press, □: Press for 1 second or more, ◎: Press for 2 seconds or more, ―― : Press simultaneously
Operation
Mode SET
－
○
○
◎
◎
◎
◎
◎
○
○
□
□
○
○
Button name
RESET MAX/MIN PHASE DISPLAY
＋
○
○
○
◎
◎
◎
◎ ◎
◎ ◎
◎ ◎
◎
◎ ◎
◎
◎ ◎
○
◎
○
◎
◎
◎ ◎
○
□
□ □
◎ ◎
SET ＋ RESET MAX/MIN PHASE DISPLAY
－
SET button RESET button
+/- button
Switch the measurement screen.
○
Switch the measurement screen in the reverse direction.
○
Switch phase display.
Switch between the harmonic RMS value and distortion ratio.
(Available on the harmonics display screen)
Enter/Exit the Max/Min value screen.
Switch the harmonic degree on the harmonics display screen.
Enter the cyclic display mode of measurement screen. Refer to
◎
5.1.3.
Enter the cyclic display mode of phase. Refer to 5.1.3.
Switch between the harmonic RMS value and distortion ratio
screen in cyclic mode. (Available on the harmonics display)
Change the units of Wh, varh, and VAh or display the lower-
digit enlarged view. Refer to 5.1.9.
Clear the Max/Min values displayed on
the screen.
Clear Max/Min values for every item in
every screen.
Reset Wh, varh, and VAh to zero.
All measured values are reset to zero simultaneously.
Reset periodic active energy to zero.
(The periodic active energy displayed on the screen only)
Set the rolling demand time period on the rolling demand
screen.
Clear the rolling demand peak value on the rolling demand
screen.
Reset operating time to zero.
(The operating time displayed on the screen only)
Reset CO equivalent to zero on the CO
2
Reset the alarm.
(For the item displayed on the screen)
Reset all alarms at once.
(For every item in every screen)
Stop the backlight blinking caused by alarm.
(Available only when set to backlight blinking)
Release the latch for digital input at once on the digital input
screen.
Enter the setting mode.
Enter the setting confirmation mode.
Enter the password protection screen.
Determine the settings and then shift to the next settings.
Return to the previous setting item.
○
Round up/down the setting value.
(Pressing for 1 second or more enables fast forward.)
Skip the settings and return to the setting menu screen.
Reflect the setting change. (Available on the END screen)
Cancel the setting change. (Available on the CANCEL screen)
Restart the instrument. (Available on the CANCEL screen)
Initialize to the factory default settings. (Available on the
CANCEL screen) Refer to 3.16.
15
PHASE button
MAX/MIN button DISPLAY button
Function
They are available
on the Max/Min
value screen.
equivalent display.
2
They are available
only when set to
manual alarm
cancellation.