3. Setting
3.2 Setting menu 1: Basic Settings (Setting the Phase Wire System, Display Pattern,
current
④CT
DISPLAY
SET
VT/Direct Voltage, CT Primary Current, etc.)
Continued form the previous page
(2)
When using VT
<
Set the secondary and primary voltages of the VT.
(a)
For 3-phase 4-wire(Phase to phase Voltage)
63.5V
100V
(b)
For 3-phase 3-wire (2CT, 3CT) or 1-phase 2-wire(phase to neutral
100V
<
Primary Voltage Settings
Default value
For 3-phase 4-wire
For 3-phase 3-wire or 1-phase 2-wire
(phase to neutral
voltage)
・
From top digit, select the value of the flickering digit by
・
The setting digit can be moved to right by
・
The setting digit can be moved to left by
・
Setting is available in range from
Less than 100V : Upper 2 digits setting
Over 100V : Upper 3 digits setting
※Error display (E05) appears when set out of 60Vto750000V range.
After that, please press
※When over 100V set over upper 3 digits setting, the display appear switching
upper 3 digits setting.
・
Press
at the lowest digit, the setting step will shift to the next one.
SET
Set the CT.
secondary
Primary /
<
Set the secondary current
1A
Note. CT is current transformers.
<
Set the primary current
Default
Setting:5.0A
・
From top digit, select the value of the flickering digit by
・
The setting digit can be moved to right by the
・
The setting digit can be moved to left by the
・
Setting is available in range from 1.0A to 30000.0A
Less than 10A : Upper 2 digits setting
Over 10A : Upper 3 digits setting
※Error display (E05) appears when set out of 1.0 to 30000.0A
range. After that, please press
and set it once again.
※When over 10A set over upper 3 digits setting, the display appear switching
upper 3 digits setting.
・
Press
at the lowest digit, the setting step will shift to the next one.
SET
>
110V
115V
110V
220V
>
:200V
(Phase to phase Voltage)
:10000V
60V to 750000V
, review the setting value and set it once
SET
Current Setting
>
5A
>
DISPLAY
, review the setting value
SET
24
120V
voltage)
+
and
Again.
and
.
.
.