Operation; Operation Procedure In Operating Mode - Mitsubishi Electric EMU4-FD1-MB User Manual

8. Operation

Operation procedure in operating mode

This unit indicates the measured value of each item in operating mode. (For the measured items which can be indicated,
page 57 )
Operation procedure to change the measured item indicated is as follows:
Operation
Indicated item is changed by every operation in following order:
Measuring item
Electric energy
(Consumption)
Current
Current demand
Voltage
Electric power
Electric power
demand
Reactive power
Change
Press
the
DISP
indicated
item
Apparent power
Power factor
Frequency
RMS value of
harmonic current
Distortion rate of
harmonic current
RMS value of
harmonic voltage
Distortion rate of
harmonic voltage
Display example
Current (phase 1)
Current demand (phase 1)
Voltage (1-2)
RMS value of total harmonic current (phase 1)
Distortion rate of total harmonic current (phase 1)
RMS value of total harmonic voltage (phase 1)
Distortion rate of total harmonic voltage (phase 1)
(49/71)
Details
unit Note
・ Unit varies depending on the
kWh
setting value
MWh
・ For changing phase to be
A
displayed
・ For changing phase to be
A
displayed
・ For changing phase to be
V
displayed
・ Unit varies depending on the
kW
setting value
MW
・Sign explanation
Unsigned ： Consumption, － ：
Regeneration
・ Unit varies depending on the
kW
setting value
MW
・ Unit varies depending on the
kVAR
setting value
MVAR
・Sign explanation
Unsigned：Lag, －：Lead
・ Unit varies depending on the
kVA
setting value
MVA
・ Indicated in three-phase 4-wire
(3P4W) only.
・Sign explanation
%
Unsigned：Lag, －：Lead
Hz
・Indicated in only when harmonic
A
current indicator (
"on" (skipped this display when set
to "oFF").
・For changing phase of harmonic
current
%
・For indication and change degree
P.51.
・Indicated in only when harmonic
V
voltage indicator (
"on" (skipped this display when set
to "oFF").
・For changing phase of harmonic
voltage
%
・For indication and change degree
P.51.
P.52.
P.50.
P.50.
P.50.
P.52.
P.52.
P.52.
P. 52.
P.24) is set to
P.51.
P.25) is set to
P.51.