Eaton 91PS UPS 8-40 kW User And Installation Manual page 51

Eaton 91PS/93PS UPS 8–40 kW
The UPS cabinet is heavy. If the unpacking instructions are not obeyed, the
cabinet can tip over and cause serious injury.
Do not tilt the UPS cabinet more than 10 degrees from the vertical or the
cabinet can tip over.
For transportation purposes, the UPS cabinet is bolted onto a wooden pallet. To
remove the pallet, do the following:
1. Before you unload the cabinet
from the pallet, use a forklift or
other material handling
equipment to move the cabinet
to the installation area. Insert
the forks of the forklift between
the skids on the bottom of the
unit.
2. Make a visual inspection and
examine that there are no signs
of shipping damages. Examine
the TipNTell and refer to the
instructions next to the indicator
on the package. The DropNTell
indicator is located on the rear
panel of the UPS and can be
verified after the next step.
©
Eaton Corporation plc 2018. All rights reserved.
WARNING
Revision: 005 Document ID: P-164000493
User's and installation guide
51 (117)