Power Connection; Parallel Data And Auxiliary Interface; Fcc Compliance - Primera Inscripta User Manual

TOC
B. POWER CONNECTION
It will be necessary to supply the printer with power from the
Power Adapter or an equivalent power source. If you choose
not to use the Power Adapter supplied with the printer, make
certain that your power source is capable of consistently
delivering +24VAC DC at 2.5 amps.
IMPORTANT! It is strongly recommended that you use the power supply
C. PARALLEL DATA AND
Connect a
would for a normal, external interface. Or, if you need to
extend the
extender cable from the printer's parallel port to a chassis-
mounted parallel port. Do the same for the Auxiliary Control
Port interface if necessary. The
at the factory maintains a list of commonly required hardware
and cabling needed to extend these ports.
D. FCC COMPLIANCE
If you remove the Optical Disc Printer's outer case, you must
make certain that the case in which it is mounted is made of
metal. This will insure that the printer maintains its FCC
compliance.
32 OEM Internal Mounting
provided by the manufacturer. If you need to use another
power supply you must contact the manufacturer to make
sure the proper electrical ratings and safety approvals are
met.
AUXILIARY INTERFACE
parallel cable to the rear panel of the unit as you
parallel port to the outside of your case, use a small
INDEX
Technical Support Department