Section 3: Interpreting The Led Status Lights; Power Led; Pause Led - Primera Signature, Inscripta rinter Autoloader Operator's Manual

SECTION 3: INTERPRETING THE LED STATUS LIGHTS

The LED Status Lights, located on Conductor's front panel, can tell you a lot about what is
happening at any given moment with the operation of the autoloader. To accurately interpret what
is meant when the lights are on, off or flashing, refer to the following chart:
A. Power LED
Status
Off
On Solid
Flashing
B. Pause LED
Status
Off
On Solid
Flashing
14
Condition
No Power. Plug in Power Adapter.
Power is ON. This is Conductor's normal "waiting" mode.
Power is ON, but an error condition exists:
a. Didn't pick up a disc
b. Dropped a disc
c. Discs out
d.
Robotic arm stalled; probably hit something while moving. Press
any button on Control Panel to re-try.
Condition
Normal "waiting" mode
Conductor is paused.
Conductor is busy; i.e. motors are running, printer is printing, etc.