Software Installation - Primera Inscripta User Manual

The self-test should look like this:
NOTE: The self-test works only with a
7. Connect the printer to your computer using a standard
parallel interface cable. For best results, always use an IEEE
1284-Compliant cable and do not connect to an A/B switch
box. Also, note that the printer will print fastest if your
computer's parallel port is set to
computers are already set to ECP). Your computer's
manual will have information on changing the
port

SOFTWARE INSTALLATION

Once you have physically set up your printer, the next step is
to install the appropriate software you'll need for printing. The
included CD contains all of the necessary software. At a
minimum, you must install the printer driver appropriate for
your computer's specific operating system (Windows®
95/98/Me or Windows 2000/XP). Please note that a
Macintosh interface is not available at this time for the Optical
Disc Printer. Below is a description of the CD contents as well
as installation instructions for each software component.
CD Contents:
• Optical Disc Printer Driver for Windows 95/98/Me
• Optical Disc Printer Driver for Windows 2000/XP
• 32-Bit Print Spooler for Windows 95/98/Me (provides
optimum print processing under Windows 95/98/Me)
iv
mode if you need to switch it to ECP .
monochrome ribbon.
ECP mode (most new
parallel