Applying Power - Primera Signature Pro User Manual

TOC
This illustration shows the input ports found on the rear panel
of the printer. Both a parallel and a serial
provided. If using the printer with Windows, you will use its
Parallel Interface
for use with auto loaders and automatic duplicators only,
which are sold separately. For more information on each of the
interface ports, please refer to Appendix A.
Auxiliary Port
Power Port
D. APPLYING POWER
1. Locate the power adapter supplied with your printer.
2. Place one end of the adapter cord into the power port on
the rear panel of the printer.
3. Plug the power cord of the adapter into an available wall
outlet. Once the power cord is connected, the printer will
automatically turn ON.
Port. Note that the printer's
INDEX
interface port are
auxiliary port
Parallel Interface Port
Getting Started 3
is