Applying Power - Primera Inscripta User Manual

Optical disc printer

Hide thumbs Also See for Inscripta:

Table of Contents

TOC

APPLYING POWER

1. Locate the power adapter supplied with your printer.

2. Place one end of the adapter cord into the Power Input Jack

on the rear panel of the printer.

3. Plug the power cord of the adapter into an available wall

outlet. Once the power cord is connected, the printer will

automatically turn ON as indicated by the

illuminating and blinking every two seconds. This is the

printer's normal "waiting" mode.

INDEX

LED Status light

Getting Started 3

Table of Contents

Do you have a question about the Inscripta and is the answer not in the manual?

510152