Appendix B: Oem Internal Mounting; Physical Mounting And Possible Case Modification - Primera Inscripta User Manual

TOC
Appendix B:
It is recommended that only qualified OEMs mount the
Inscripta inside a duplicating tower, autoloader or full-height
drive bay. The integration will require physical mounting,
possible modification of the drive bay, power connection and a
means to deliver parallel data and control signals to the unit.
All of these are described in the following sections.
A. PHYSICAL MOUNTING AND POSSIBLE CASE
MODIFICATION
The dimensions below indicate the area required for mounting
the printer. You will need the equivalent height and width of a
full-height (two half-height) drive bay slot. Since many PC-
type cases include rear support tabs for drives, you may need
to remove or bend these tabs or otherwise modify the case in
order to fit the printer in the space. You will also see that the
Optical Disc Printer is deeper than an ordinary disc drive or
CD recorder. Be sure that you have enough depth in your
cabinet before making any other modifications.
5.76 in.
(146.4 cm)
3.39 in.
(86 cm)
OEM Internal Mounting
Top View
13.11 in.
(333.1 cm)
Side View
INDEX
Rear View
5.87 in.
(149 cm)
Front View
OEM Internal Mounting 31