Device Options Tab; Ribbon Type - Primera Inscripta User Manual

TOC
Also in the section are the Manual Load and Manual Eject
checkboxes. Here are what each do:
Manual Load
Select the Manual Load option when you are printing multiple
copies of a single design or if using an auto-loader. If you do
not select this option when printing multiple copies, the printer
does not know whether or not you have loaded a blank disc
and will print each of the selected number of copies onto the
same disc. This is not a pretty sight! However, when this
option is selected (checked), you must press the Tray Eject
Button after each new disc is loaded. This will close the
Tray and let the printer know that a fresh, unprinted disc is
installed and ready to be printed.
Manual Eject
Select the Manual Eject option if you don't want the tray to be
automatically ejected after printing is completed. When this
option is selected, you must press the Tray Eject button after
the printer has completed printing onto the disc.

Device Options Tab

Ribbon Type

The Ribbon Type box selects the type of ribbon that you will be
using for printing. Click on the Ribbon Type down arrow.
Select the ribbon option that matches the type of ribbon
currently loaded in the printer from the list that appears.
Before you begin to use the printer, you must install the proper
ribbon. See Section 2 for details on how to do this.
Ribbon Type Hints:
When you select Monochrome Wax Resin Ribbon (Series #100),
all output will be a single color. You can select the type of
dither to use on half-tone objects such as photos or shades of
gray with the Dither Option, described below.
When you select 2-Color Wax Resin (Series #200), there are
several things to keep in mind. All objects that are black or
have shades of gray will be printed using the black panel of the
2-color ribbon. All objects with a color other than black or
shades of gray will be printed with the color panel (red, blue,
or green) of the 2-color ribbon.
20 Using the Optical Disc Printer with Windows
INDEX
CD