Berbel Skyline Curve Operating And Installation Instructions page 15

Installation
D WARNING!
Risk of injury due to the device falling down!
Loosen the mounting sleeves to align the device. If the
fastening sleeves are loosened too far, the support cable
can be torn out of the screwed end and the device may fall
down. The device's size and weight can cause severe injuries.
☞ Never unscrew the fastening sleeves completely.
☞ Ensure that there is no more than 10 mm of thread on the
screwed end visible.
☞ Align the hood body horizontally by adjusting the
fastening sleeves.
☞ Tighten all fastening sleeves using the lock nuts (counter
nuts) on the ceiling mounting plate.
☞ Ensure that all fastening sleeves are fully tightened on the
ceiling mounting plate.
The hood body is aligned and secured.
6006241_0 – 30.05.2022
D WARNING!
Risk of death due to electric shock!
Touching live parts can cause an electric shock, burns or
death.
☞ Ensure that the power supply is switched off and remains
so.
Variant without ceiling effect lighting
☞ Plug the Wieland plug into the Wieland socket.
☞ Feed the mains cable with the Wieland plug tightly from
the device to the ceiling mounting plate.
☞ Secure the mains cable from the Wieland plug to the
bracket on the ceiling mounting plate with a cable tie.
☞ Connect the earthing cable.
15