Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Berbel Skyline Series
Summary of Contents for Berbel Skyline Series
- Page 1 Ceiling lift hood Skyline / Skyline Edge Operating and installation instructions for the models ƒ BDL 95 SK ƒ BDL 115 SK ƒ BDL 135 SKE ƒ BDL 95 SKE ƒ BDL 115 SKE ƒ BDL 135 SKE Sound ƒ BDL 95 SKE-I ƒ...
- Page 2 Document information Symbol clarification - text ☞ Handling requirement Operating and installation instructions for: y Ceiling lift hood BDL 95 SK E01 y Listing y Ceiling lift hood BDL 95 SKE E01 y Ceiling lift hood BDL 95 SKE-I E01 D Reference to another point in this document y Ceiling lift hood BDL 95 SKE-L E01 y Ceiling lift hood BDL 115 SK E01...
-
Page 3: Table Of Contents
Table of contents Safety information ......4 Disposal ........26 Proper intended use . -
Page 4: Safety Information
Safety information Safety information General safety instructions D WARNING! Proper intended use Hazard through a disregard of the operating and installation instructions! The device serves to extract cooking vapours. This manual contains important information for the safe The device is intended exclusively for private domestic use. handling of the device. -
Page 5: Product Information
Product information Product information 2.2.1 Recirculated air mode The filter filling in the recirculated air filter neutralises any smelly odours present. The odour-free, cleaned room air is Functional principle fed back into the room. The humidity in the room can be reduced with the fresh air feed. -
Page 6: Skyline Edge Ceiling Lift Hood
Product information 2.3.2 Skyline Edge ceiling lift hood 2.3.3 Ceiling consoles: Variants with all-round effect lighting 230 V y With stainless steel cover y With glass cover y With glass cover and integrated ceiling effect lighting The relevant documentation must be observed for ceiling consoles with lowering capability. -
Page 7: Product Overview
Product information Product overview A Ceiling mounting plate B Screwed end C Mounting sleeve D Support cable E Cover for ceiling mounting plate F Wieland socket G Bracket A Ceiling console comprising a ceiling mounting plate and H Mains cable with Wieland plug a cover Lock nut for ceiling mounting plate B Hood body with effect lighting... -
Page 8: Scope Of Delivery
Product information Scope of delivery Technical data Information on the model (e.g. serial number, year of construction) is quoted on the front panel. D “2.4 Product overview” (page 7). 2.6.1 Skyline ceiling lift hood 230 V / 230 V / Connection voltage 50 Hz 50 Hz... -
Page 9: Skyline Edge Ceiling Lift Hood
Product information 2.6.2 Skyline Edge ceiling lift hood Variants with surface effect lighting Variants with all-round effect lighting 230 V / 230 V / Connection voltage 50 Hz 50 Hz Connection 230 V / 230 V / 230 V / 230 V / Total power max. -
Page 10: Installation
Installation Installation Requirements for the installation location D WARNING! Safety information for installation Risk of death due to improper installation! Disregard of the ambient conditions can lead to hazardous situations, e.g. in the handling of electrical power or gas. D WARNING! ☞... -
Page 11: Requirements For Individual Operating Modes
Installation Requirements for individual operating modes The cross-section, length, type and course of the exhaust pipe affect the extraction efficiency. Changing the direction Further accessories may be required depending on the of the air too severely leads to a loss of performance and to operating mode. -
Page 12: Unpack The Device
Installation 3.5.3 Install the ceiling mounting plate ☞ Assemble the tools and materials required: y Stable stepladder The device is designed to be hung on ceilings. y Folding rule or measuring tape y Pencil When mounting to a solid ceiling: y Spirit level ☞... - Page 13 Installation a Gap between two 721 mm 1021 mm 1183 mm bolt anchors b Gap between two 270 mm 200 mm 200 mm bolt anchors c Diameter of circle 770 mm 1040 mm 1200 mm over slots ☞ Insert the bolt anchors into the holes. ☞...
- Page 14 Installation Variants with integrated ceiling effect lighting ☞ Screw the nuts and the washers onto the bolt anchors in the slots. ☞ Ensure that the ceiling mounting plate is aligned parallel to the hob’s front edge. ☞ Tighten the nuts cross-wise using the spanner. ☞...
-
Page 15: Hang The Device In Place
Installation D ATTENTION! 3.5.4 Hang the device in place Danger of property damage due to improper hanging on D WARNING! the cables! The cable cannot be wound up correctly due to obstructions Danger of injuries through improper handling! or irregularities on the cable guide. Hanging the device requires a great deal of physical exertion ☞... - Page 16 Installation Variant without ceiling effect lighting ☞ Plug the Wieland plug into the Wieland socket. ☞ Align the hood body horizontally by adjusting the fastening sleeves. ☞ Tighten all fastening sleeves using the lock nuts (counter nuts) on the ceiling mounting plate. ☞...
- Page 17 Installation Variants with integrated ceiling effect lighting For ceiling consoles with lowering capability and JetStream technology: ☞ Ensure that the ceiling console is connected correctly. ☞ Ensure that the accessories (e.g. wall box, window contact switch) are connected. Observe the associated documentation. For ceiling consoles with lowering capability and glass cover: y The glass cover is placed loosely on the device.
-
Page 18: Set The End Positions
Installation 3.5.5 Set the end positions With all variants: ☞ Check that the mains cable and the electrical connection The remote control is used to set the end positions. cable are not kinked, crushed or damaged. Observe the instruction manual for the remote control. D ATTENTION! Danger of damage due to falling parts! The cover can fall down when it is being removed and... -
Page 19: Set Colour Temperature
Installation 3.5.6 Set colour temperature The colour temperature of the hob lighting, the effect lighting and the ceiling effect lighting can be set to the colour temperature of the kitchen environment. This may be set individually or synchronously. The remote control is used to set the colour temperature. Observe the instruction manual for the remote control. -
Page 20: Operation
Operation Operation Measures to ensure a sufficient supply of fresh air: ☞ Open the windows. ☞ Open the doors. ☞ Ensure that the window contact switch and the wall box Safety information for operation are installed and ready for operation. ☞... -
Page 21: Cleaning
Cleaning Cleaning Cleaning procedures The device draws in dirt particles (e.g. grease and oil particles) with the air from the room. The dirt particles are separated off Safety information for cleaning and collected in the upper section, the lower section and in the Capillar Trap. - Page 22 Cleaning D CAUTION! Danger of injuries due to device edges! When removing and replacing the lower section or the cross flow, fingers may become trapped and crushed. ☞ Move the device parts slowly and carefully. D ATTENTION! Danger of damage due to falling parts! The lower section and the Capillar Trap can fall down when being removed and damage the hob, the kitchen furnishings or other objects.
-
Page 23: Maintenance
Maintenance Maintenance Maintenance intervals y When the control indicator blinks - every 1000 operating hours. Observe the instruction manual for the remote control. Safety information for maintenance y With odours in the exhaust air. y With daily use, after 24 months at the latest. D WARNING! y With occasional use, after 36 months at the latest. -
Page 24: Fault Rectification
Maintenance ☞ Empty the filter completely. ☞ Fill the filter with new charcoal up to the maximum level. ☞ Screw the cover back on to the top of the filter. ☞ Clean the filter from the outside (e.g. through extraction with a vacuum cleaner). -
Page 25: Dismounting
Dismounting Dismounting Poor device performance. y The recirculated air filter is clogged. ☞ Replace the filter filling of the recirculated air filter. D WARNING! D “6.2.2 Replacing the filter filling (only for BUF-BDL Danger of injuries through improper handling! recirculated air filter)” (page 23). Taking the device down requires a great deal of physical y The exhaust pipe was not properly connected or installed. -
Page 26: Dismounting The Ceiling Mounting Plate
Disposal Disposal Dismounting the ceiling mounting plate ☞ Remove the nuts and the washers from the slots in the ceiling mounting plate. Dispose of packaging ☞ Unscrew the nuts from the lock holes in the ceiling mounting plate. ☞ Rotate the ceiling mounting plate. D ATTENTION! ☞... -
Page 27: Dispose Of Filter Filling
If you have any questions or suggestions, please select from Dispose of the device the following options: D ATTENTION! Post: berbel Ablufttechnik GmbH Risk of environmental damage due to improper disposal Sandkampstraße 100 of the device! D-48432 Rheine The device is subject to the European Directive 2012/19/EU... - Page 28 6003948_d 14.05.2019...