Omron SYSMAC CS1W-LCB01 Operation Manual page 62

Outline
Category Type
Operation Signal 161
Block (con- Selec- (See note
1.)
tinued) tion/
162
Switching
(See note
1.)
163
(See note
1.)
164
(See note
1.)
165
(See note
1.)
166
(See note
1.)
167
168
(See note
2.)
169
(See note
2.)
ITEM Set- 171
tings (See note
1.)
172
(See note
1.)
174
(See note
1.)
Pulse 182
Train
Operation
183
184
185
186
28
Block Block Name
Model
Rank Selector
Input Selector
3-input Selector Selects and outputs one of three analog
3-output Selec-
tor
Constant Selec-
tor
Constant Gen-
erator
Ramped Switch Switches two analog inputs (or constants)
Bank Selector
Split Converter
Constant ITEM
Setting
Variable ITEM
Setting
Batch Data Col-
lector
Accumulated
Value Input
Adder
Accumulated
Value Analog
Multiplier
Accumulator for
accumulated
value input
Contact
input/Accumu-
lated value out-
put
Accumulated
Value
Input/Contact
Output
Function
Selects the rank of up to 8 analog signals.
Selects the specified analog signals speci-
fied by the contact signal from up to 8 ana-
log signals.
input signals.
Outputs one analog input signal in three
switched direction.
Selects 8 preset constants by the contact
signal.
Outputs 8 independent constants.
with a ramp.
Records the PID parameters (SP, P, I, D,
MH, ML) in up to 8 sets in advance, and
switches the PID parameter for
Basic/Advanced/Blended PID Blocks
according to the analog input range (zone)
or input bits.
Inputs the MV from the Basic PID block or
Advanced PID block, converts the MV into
two analog outputs for V characteristics or
parallel characteristics (e.g., MV for heating
or cooling) and outputs them.
Writes the constant to the specified ITEM
at the rising edge of the send command
contact.
Writes the analog signal to the specified
ITEM at the rising edge of the send com-
mand contact.
Stores each of max. 8 analog inputs to
buffer by a certain timing within sequential
processing.
Adds up to four accumulated value signals.
Multiplies analog signals by the accumu-
lated value signals.
Converts 4-digit accumulated value signals
to 8 digits.
Counts low-speed contact pulses, and out-
puts 8-digit accumulated signals.
Converts 4-digit accumulated value signals
to low-speed contact pulses before they are
output.
Section 1-1
Allocatable Block
Address
LCB05/05D: 001 to 500
LCB03: 001 to 300
LCB01: 001 to 050
LCB05/05D: 001 to 500
LCB03: 001 to 300
LCB01: 001 to 050