Omron SYSMAC CS1W-LCB01 Operation Manual page 33

Other Applicable Directives
Even if machinery and equipment complies with EMC standards before
assembly, this compliance may change depending on the device, the configu-
ration of the control panel, and wiring, so OMRON cannot guarantee that a
particular system complies with the directive. You must therefore confirm that
EMC Directives are met for the overall machine or device.
Note EMC: One directive relating to Electro-Magnetic Compatibility
EMS: Electro-Magnetic Susceptibility standard EN6100-6-2
EMI: Electro-Magnetic Interference standard EN61000-6-4
Common Emission Standard EN61000-6-4, radiated emission standard
(10 m)
Low Voltage Directive
The Low Voltage Directive provides that necessary safety standards are guar-
anteed for devices operating at voltages of 50 to 1,000 V AC or 75 to 1,500 V
DC to comply with EN61131-2.
7
xxxiii