Network Variable Description - Vsd Profile - Configuration - Danfoss FC 100 Operating Instructions Manual

VLT® FC 100 LonWorks

5.6 Network Variable Description - VSD Profile - Configuration

5.6.1 Max Motor Speed [%]
Variable SNVT
name: type:
nciMaxSpeed SNVT_lev_percent
This variable configures the maximum motor speed in % and associates it with par. 4-13
The value is entered as a percent of nominal speed, as defined by the Nominal Speed (nciNmlSpeed) configuration value.
For more information on reference scaling, please refer to the
parameter access command.
5.6.2 Min Motor Speed [%]
Variable SNVT
name: type:
nciMinSpeed SNVT_lev_percent
This variable configures the minimum motor speed in % and associates it with par. 4-11
The value is entered as a percent of nominal speed, as defined by the Nominal Speed (nciNmlSpeed) configuration value.
For more information on reference scaling, please refer to the
5.6.3 Nom Motor Speed [RPM]
Variable SNVT
name: type:
nciNmlSpeed SNVT_rpm
This variable configures the nominal motor speed in RPM and associates it with par. 1-25
NB!
Please note that this variable can be adjusted only while the frequency converter is stopped.
If a value lower than 10 RPM is entered, nciNmlSpeed will be set to 10 RPM.
5.6.4 Nominal Motor Frequency [Hz]
Variable SNVT
name: type:
nciNmlFreq SNVT_freq_hz
This variable configures the nominal motor frequency and associates it with par. 1-23
NB!
Please note that this variable can be adjusted only while the frequency converter is stopped.
If a value lower than 20 Hz is entered, nciNmlFreq will be set to 20 Hz.
Default value:
100 %
How to Control the FC 100
Default value:
0 %
How to Control the FC 100
Default value:
1420 RPM
Default value:
50 Hz
Motor Frequency
MG.11.E2.02 - VLT ® is a registered Danfoss trademark
5 Configuration of the system
Min value:
0 %
Motor Speed High Limit [RPM]
(par. 4-14 in Hz mode).
section. If a value higher than 163.830% is requested, use the
Min value:
0 %
Motor Speed Low Limit [RPM] (par. 4-12 in Hz mode).
section.
Min value:
10 RPM
Motor Nominal Speed
.
Min value:
20 Hz
.
Max value:
163.830 %
5
Max value:
163.830 %
Max value:
65,534 RPM
Max value:
100 Hz
37