Danfoss FC 100 Operating Instructions Manual page 9

3 Introduction
3.1.5 Background Knowledge
The Danfoss LonWorks Option Card is designed to communicate with any system complying with the FTT and 78Kbps LonWorks standard. Familiarity
with this technology is assumed. Issues regarding hardware or software produced by other manufacturers, including commissioning tools, are beyond
the scope of this manual and are not the responsibility of Danfoss.
For information regarding commissioning tools or communication with a non-Danfoss node, please consult the appropriate manuals.
3
3.1.6 Related Literature for the VLT HVAC Drive
Title
VLT ® HVAC Drive Operating Instructions
VLT ® HVAC Drive Design Guide
VLT ® HVAC Drive Programming Guide
The following literature is available for the FC 100 series:
www.danfoss.com/BusinessAreas/DrivesSolution
Please also refer to
3.1.7 LonMark Certification
The LonWorks option is conform to the LonMark standards and is certified towards LonMark ver. 3.4
8
Literature no.
MG.11.Ax.yy
MG.11.Bx.yy
MG.11.Cx.yy
for additional information.
MG.11.E2.02 - VLT ® is a registered Danfoss trademark
VLT® FC 100 LonWorks