Board Connectors And Jumpers - Advantech UNO-1372GH User Manual

A.2

Board Connectors and Jumpers

There are several connectors and jumpers on the inside board. The following sec-
tions tell you how to configure the hardware setting. Figure A.1 shows the locations
the connectors and jumpers.
Table A.2: Connectors and Jumpers
Label
CN16
CN7, CN8
CN15
CN17
CN6
SW1
SW2
JP1
SW1:
 Switch to 4: disable function of mini PCIe slot 1
 Switch to 3: disable function of mini PCIe slot 2
 Switch to 1 and 2: enable function of mini PCIe slot 1 and 2 (default setting)
Figure A.1 Connector & Jumper Locations (front)
Function
mPCIe Slot for mSATA
mPCIe slot (support iDoor technology).
mPCIe with height limited
SIM card slot for CN15
SIM card slot for CN7
mPCIe function enable/disable
Digital Input wet/dry contact switch
DO3/PL LED control switch
23 UNO-1372G User Manual