Activating A Sim Card On Microai Launchpad - Renesas CK-RX65N Getting Started Manual

CK-RX65N
The activation steps above are provided by SIM Provider Truphone. They are the most current at the time of
publishing this application note. If you need help activating your SIM card, contact Truphone support
If you have a SIM card from any other provider then contact the technical support for that provider.
For any other issue that cannot be resolved please contact Renesas Support at
Note: The SIM card provider for the Quick Start Guide example project is Truphone. If you use any other
SIM card provider you must change the Access Point Name required for the SIM card provider in your
global region. Failure to do so could result in the RYZ014A not connecting to the cellular network.

4.2 Activating a SIM card on MicroAI Launchpad

The MicroAI Launchpad
card, use the following steps:
1. Create a Launchpad account. Do so by registering on the sign-up page and verifying the account
through the verification email sent after registration.
2. Login to the new Launchpad account and click on the Create Device Profile tile. Make sure Renesas
CK-RX65N(or Renesas RSK-RX65N when missing CK-RX65N) is selected for the Device Type and
CAT-M for the Connectivity Type. Fill other fields as desired then click Next.
R01AN6870EJ0110 Rev.1.10
Jun.02.23
Getting Started Guide with RYZ014A Azure Cellular Application
iot.truphone.com or
platform will be needed for the activation of the SIM card. To activate the SIM
Figure 10. Create Device Profile on MicroAI Launchpad
Contact Support | Truphone.
Technical Support.
Page 8 of 52