Iot Plug And Play Certification Requirements; Program Purpose; Requirements - Renesas CK-RX65N Getting Started Manual

CK-RX65N

7. IoT Plug and Play Certification Requirements

This section outlines the device specific capabilities that will be represented in the Azure IoT Device catalog.
A capability is singular device attribute that may be software implementation or combination of software and
hardware implementations.

7.1 Program Purpose

IoT Plug and Play enables solution builders to integrate smart devices with their solutions without any
manual configuration. At the core of IoT Plug and Play, is a device model that advertises the device
capabilities to an IoT Plug and Play-enabled application.
Promise of IoT Plug and Play certification are:
1. Defined device models and interfaces are compliant with the
2. Easy integration with Azure IoT based solutions using the
and Azure IoT Central
3. Product truth validated through testing telemetry from end point to cloud using DTDL
Note
Upon completed testing and validation, we may request that the product is evaluated by Microsoft.

7.2 Requirements

[Required] Device to cloud: The purpose of test is to make sure devices that send telemetry works
with IoT Hub
Name IoTPnP.D2C
Target Available now
Availability
Applies To Leaf device/Edge device
OS Agnostic
Validation Automated
Type
Validation Device must send any telemetry schemas to IoT Hub. Microsoft provides the
execute the tests. Device to cloud (required): 1. Validates that the device can send message to
AICS managed IoT Hub 2. User must specify the number and frequency of messages. 3. AICS
validates the telemetry is received by the Hub instance
Resources Certification steps
R01AN6870EJ0110 Rev.1.10
Jun.02.23
Getting Started Guide with RYZ014A Azure Cellular Application
(has all the additional resources)
Digital Twin Definition Language
Digital Twin APIs : Azure IoT Hub
portal workflow
Page 43 of 52
to