Renesas CK-RX65N Getting Started Manual page 46

CK-RX65N
[If implemented] Cloud to device: The purpose of test is to make sure messages can be sent from
cloud to devices
Name IoTPnP.C2D
Target Available now
Availability
Applies To Leaf device/Edge device
OS Agnostic
Validation Automated
Type
Validation Device must be able to Cloud to Device messages from IoT Hub. Microsoft provides the
workflow
can receive message from IoT Hub 2. AICS sends random message and validates via message
ACK from the device
Resources 1. Certification steps
2. Send cloud to device messages from an IoT Hub
[If implemented] Direct methods: The purpose of test is to make sure devices works with IoT Hub and
supports direct methods
Name IoTPnP.DirectMethods
Target Available now
Availability
Applies To Leaf device/Edge device
OS Agnostic
Validation Automated
Type
Validation Device must be able to receive and reply commands requests from IoT Hub. Microsoft provides
the portal workflow
method payload of direct method. 2. AICS validates the specified payload request is sent from Hub
and ACK message received by the device
Resources 1. Certification steps
2. Understand direct methods from IoT Hub
R01AN6870EJ0110 Rev.1.10
Jun.02.23
Getting Started Guide with RYZ014A Azure Cellular Application
to execute these tests. Cloud to device (if implemented): 1. Validates that the device
(has all the additional resources),
to execute the tests. Direct methods (if implemented): 1. User has to specify the
(has all the additional resources),
portal
Page 46 of 52