Renesas CK-RX65N Getting Started Manual page 44

CK-RX65N
[Required] DPS: The purpose of test is to check the device implements and supports IoT Hub Device
Provisioning Service with one of the three attestation methods
Name AzureCertified.DPS
Target New
Availability
Applies To Any device
OS Agnostic
Validation Automated
Type
Validation Device supports easy input of target DPS ID scope ownership. Microsoft provides the
workflow
of the attestation methods (X.509, TPM and SAS key) 2. Depending on the attestation method,
user needs to take corresponding action such as a) Upload X.509 cert to AICS managed DPS
scope b) Implement SAS key or endorsement key into the device
Resources Device provisioning service overview
[Required] DTDL v2: The purpose of test to ensure defined device models and interfaces are
compliant with the Digital Twins Definition Language v2.
Name IoTPnP.DTDL
Target Available now
Availability
Applies To Any device
OS Agnostic
Validation Automated
Type
Validation The portal workflow
using either the MQTT or MQTT over WebSockets protocol 2. Models are compliant with the DTDL
v2 3. Telemetry, properties, and commands are properly implemented and interact between IoT
Hub Digital Twin and Device Twin on the device
Resources Public Preview Refresh updates
R01AN6870EJ0110 Rev.1.10
Jun.02.23
Getting Started Guide with RYZ014A Azure Cellular Application
to execute the tests to validate that the device supports DPS 1. User must select one
validates: 1. Model ID announcement and ensure the device is connected
portal
Page 44 of 52