CK-RX65N
3.
You can see your created device in Devices section of AZURE IoT Explorer
5.7 Prepare the Device
To connect the device to Azure, modify a configuration file for Azure IoT settings(of your Device ID
and Hostname), build and flash the image to the device.
Add configuration
Import the application project into an empty e 2 studio. Open sample_config.h and make the
1.
changes to the configuration as shown in the snapshot with your Hostname, deviceId and
USE_DEVICE_CERTIFICATE.
Constant name
HOST_NAME
DEVICE_ID
USE_DEVICE_CERTIFICATE
R01AN6870EJ0110 Rev.1.10
Jun.02.23
Getting Started Guide with RYZ014A Azure Cellular Application
Figure 42. Newly Created Device
Value
{Your IoT hub hostName value}
{Your deviceID value}
1
Page 26 of 52