Renesas CK-RX65N Getting Started Manual page 22

CK-RX65N
2. Copy the connection string.
3. Open the Azure IoT Explorer and select IoT hubs > Add connection.
4. Paste the connection string into the Connection string box.
5. Select Save.
Note: In some cases, Azure IoT Explorer may report an error that the default port that IoT Explorer
is trying to use is being used by another application. In order to overcome this error, you can
add a different port number for the Azure IoT Explorer as shown below.
Go to your PC, edit the system environmental variables similarly to the screenshots shown below.
R01AN6870EJ0110 Rev.1.10
Jun.02.23
Getting Started Guide with RYZ014A Azure Cellular Application
RXCLOUDHUB
Figure 35. Adding Connection String
RXCLOUDHUB
Page 22 of 52