Table of Contents
Advertisement
TECNOEKA Srl ___________________________________________________________ operating and instruction manual
Use key
and the relevant PARAMETER SCREEN is displayed;
Use the keys
and
minimum speed (
medium speed
(
maximum speed (
Use the "SELECT"
after 5".
Important
The maximum speed is already pre-set for every cooking cycle
The key
may be used even during the cooking cycle to modify the speed level of fans.
Should this operation need to be performed during an already programmed cooking cycle, the fan
speed values will go back to those originally set upon creating the program.
"SEMI-STATIC" MODE
"Semi-static" baking is a mode that allows motors to be activated only when the heating
elements are operating.
The fans are activated for a few seconds, in order to distribute the heat generated by the heating
elements and make the temperature inside the cooking chamber even.
In this way static oven operation is reproduced.
To activate the "semi-static" baking mode operate as follows (from OVERVIEW SCREEN):
touch the key
and the display shows the screen "AIR FLOW SPEED SETTING".
Touch the key "STEP"
into "ST ON" which indicate successful activation.
Touch the key "SELECT"
the direction of the icon indicating motor speed.
Fan speed may be modified also while baking in "semi-static" mode.
Operate as follows (from OVERVIEW SCREEN):
touch the key
and the display shows the screen "AIR FLOW SPEED SETTING".
Touch keys
and
Touch key "SELECT"
4.3.4 Selection of cooking steps
Each cooking cycle may consist of up to 9 STEPS. The desired parameters may be set for each step.
To move from one step to the next one, after setting STEP 1, act as follows:
touch key "STEP"
touch key
. The red OVERVIEW SCREEN is displayed reading STEP 2 (the red background warns
that the TIME parameter has not been set and therefore the selected step cannot be operative).
page 20 _____________________________________________________________________________________________
to set the desired speed level:
)
)
)
key to confirm the choice, otherwise the choice is confirmed automatically
to activate the "semi-static" baking mode: the words "ST OFF" turn
to confirm the selection: "ST" is displayed in the overview screen in
to set the desired speed.
to confirm the selection.
(Overview screen)
to select STEP 1 (word highlighted on dark box);
(
).
Advertisement
Table of Contents
