Specification - Carlisle BINKS Maple 8/25 Service Manual

Maximum recommended continous cycle rate [cycles/min]:
Maximum recommended intermittent cycle rate [cycles /
Air consumption @ 15 cycles/min and 6 bar [87 psi] air inlet
Air consumption @ 30 cycles/min and 6 bar [87 psi] air inlet
# Note: Class 3.4.2 Air Quality (Refrigerant dried - water +3ºC@7bar) may be used, however, above 15
cycles/min optional heavy duty mufflers 192821 or piped exhaust system should be used, if used continuously.
77-3232 R3.2

Specification

Maximum air inlet pressure:
Maximum fluid pressure:
Nominal flow volume / cycle:
Output @ 60 cycles / min:
Fluid inlet connection:
Fluid outlet connection:
Compressed Air Inlet
Air volume / cycle @ 3.1 bar/45psi:
Air volume / cycle @ 6.2 bar/90psi:
Max. Pump Fluid Inlet Pressure
Air Quality ISO 8573.1 Class 3.3.2
Ratio:
min]:
pressure:
pressure:
Water: -20°C @ 7bar [940ppm]
# See Note
Weight:
4/20
25:1
7 bar [101.5 psi]
175 bar [2500 psi]
0.2 l/m [0.053 US gal/m]
12 l/m [3.2 US gal/m]
20
40
1'' Sanitary
1/2'' NPT Female
1/2" BSPP / NPSM
20 l/m [0.7 SCFM]
40 l/m [1.4 SCFM]
580 l/m [20.5 CFM]
1160 l/m [41 CFM]
2 bar [30 psi]
Dirt: 5 microns
Oil: 0.1mg/m³
42 kg / 92 lbs
www.carlisleft.com
EN