Eu Declaration Of Conformity - Carlisle BINKS Maple 8/25 Service Manual

Product Description / Object of Declaration:
This Product is designed for use with:
Suitable for use in hazardous area:
Protection Level:
Notified body details and role:
This Declaration of conformity / incorporation
is issued under the sole responsibility of the
manufacturer:

EU Declaration of Conformity

This Declaration of conformity / incorporation is issued under the sole responsibility of the
manufacturer:
Machinery Directive 2006/42/EC
ATEX Directive 2014/34/EU
by complying with the following statutory documents and harmonized standards:
EN ISO 12100:2010 Safety of Machinery - General Principles for Design
EN 12621:+A1:2010 Machinery for the supply and circulation of coating materials under pressure - Safety
requirements
EN 1127-1:2011 Explosive atmospheres - Explosion prevention - Basic concepts
EN 13463-1:2009 Non electrical equipment for use in potentially explosive atmospheres - Basic methods and
requirements
EN 13463-5:2011 Non electrical equipment for use in potentially explosive atmospheres - Protection by
constructional safety "c"
Providing all conditions of safe use / installation stated within the product manuals have been complied with and
also installed in accordance with any applicable local codes of practice.
Signed for and on behalf of Carlisle Fluid
77-3232 R3.2
Technologies UK Ltd:
Pumps - Maple, DVP, 104009, 104010/LS, 104016,
104027, 104032, 104040/1/2, 104077, 104020,
104023, 104025, 104028/9, 106933, 104205,104149-
52, 104207-15, 104147.
Solvent and Water based materials
Zone 1
II 2 G X IIB T4
Element Materials Technology (0891)
Lodging of Technical file
Carlisle Fluid Technologies UK Ltd,
Ringwood Road,
Bournemouth, BH11 9LH. UK
Director of Sales (EMEA)
D Smith
27/6/18
Bournemouth,BH11 9LH,UK
2/20
EN

www.carlisleft.com