Bellows Replacement - Carlisle BINKS Maple 8/25 Service Manual

ITEM PART NO.
1 502377
2 502382
2
77-3232 R3.2

Bellows Replacement

Bellows positioning tool
Bellows assembly spigot
1
DESCRIPTION
Screw Item No. 2 (assembly spigot) onto the
piston shaft
Using Item No. 1, push bellows over spigot
until located in groove.
Smear loctite 572 over nose of bellows,
thread nut onto bellows ensuring the thread
starts squarely.
Grip bellows lightly by hand and tighten the
nut with a 32mm A/F spanner until the nut
contacts the bellows shoulder.
18/20
QTY REMARKS
1
1
www.carlisleft.com
EN