Comnet netwave NW2 Installation And Operation Manual page 40

INSTALLATION AND OPERATION MANUAL
8.7.5 ADMIN Page C0NFIG MANAGEMENT Section
This section allows the user to save the current configuration of the node in a file allowing
backup of node configuration.
Backup
Configuration
Backup System
Log
Upload
Configuration
8.7.6 ADMIN Page DEVICE REBOOT/RESET Section
Reboot Button
Reset to defaults Will restore the node to factory defaults erasing all user set parameters.
TECH SUPPORT: 1.888.678.9427
When the Backup button is presses, a prompt will pop up asking
where to store the configuration file.
When Backup is pressed, a page showing the contents of the current
log files will be displayed. This then can be saved. One will have to hit
the back button to get to the previous ADMIN page.
Hit browse to the location of a backup configuration file then
hit restore. This will restore the unit configuration to the stored
configuration.
Will reboot the node
NW1/NW2
INS_NW(1,2)_REV– 06/10/13 PAGE 40