INSTALLATION AND OPERATION MANUAL
6.0 Key Default Configurations
IP Address of Web Server
LAN Mode for Web Server
Web Server User ID
Web Server Password
Web Server Guest User ID
Web Server Guest Password guest
SSID
WPA Pre-shared Key
Channel-Frequency (AP)
Channel Spectrum Width
Long Range Parameters
Note: A Reset to defaults (performed on the ADMIN page) will erase all user configurations
including the factory set MAC lock on Point to Point (NWKx) models.
TECH SUPPORT: 1.888.678.9427
192.168.10.100 for NWKx_AP
192.168.10.101 for all other models
Static Addressing
admin
admin
guest
NetWave-1
12345678
Auto
20/40M
Enabled and defaulted to 1000m
NW1/NW2
INS_NW(1,2)_REV– 06/10/13 PAGE 12
Need help?
Do you have a question about the netwave NW2 and is the answer not in the manual?