Comnet netwave NW2 Installation And Operation Manual page 38
Industrial outdoor 802.11a/n wireless ethernet
Hide thumbs
Also See for netwave NW2:
- Installation and operation manual (71 pages) ,
- Quick start manual (9 pages) ,
- Quick start manual (8 pages)
Table of Contents
Advertisement
INSTALLATION AND OPERATION MANUAL
• Press the upgrade button and you should see a prompt confirming the upgrade to continue.
Select Yes:
• The following screen will now show reminding the user to not reboot during an upgrade
process. This screen should render for at least 60 seconds if the PC browsing to this particular
node is locally connected.
Note: If a firmware upgrade is being performed on a node connected on the remote end of
a wireless connection, It may take several minutes for this screen to clear as the link needs to
re-establish and connections to restart. One may have to clear ARP cash on the connected PC by
issuing arp –d command at the command prompt.
TECH SUPPORT: 1.888.678.9427
NW1/NW2
INS_NW(1,2)_REV– 06/10/13 PAGE 38
Advertisement
Table of Contents
Need help?
Do you have a question about the netwave NW2 and is the answer not in the manual?
Questions and answers