Comnet netwave NW2 Installation And Operation Manual page 19

INSTALLATION AND OPERATION MANUAL
8.2.4 STATUS-Client Page LOCAL STATION STATICS Section
Received
Transmitted
8.2.5 STATUS-Client Page LOCAL STATION ERROR Section
RX Invalid NWID Shows the number of SSIDs detected that is different from the Remote
RX Invalid Crypt Represents the number of transmitted and received packets which
RX Invalid Frags This value represents dropped packets due to packet reassembly
TX Excessive
Retries
Missed Beacons Beacons are management packets sent by an AP and this value
Other Errors
TECH SUPPORT: 1.888.678.9427
Shows Bytes, Packets, and Errors received
Shows Bytes, Packets, and Errors transmitted
AP SSID. This number will continually count up and will count up faster
in congested RF environments. It is normal to see this count increase.
were encrypted with the wrong encryption key and failed the
decryption routines. It can be used to detect invalid wireless security
settings and encryption break attempts.
failure due to link layer fragments.
Represents the number of packet delivery failures. Undelivered
packets are retransmitted a set number of times before an error is
logged and counted.
represents the number of beacons which were not received by the
client. Missed Beacon counts could indicate that there is too much
distance between the Client and AP.
This count represents the total number of transmitted and received
packets that were lost or discarded for reasons other than what is
listed above.
NW1/NW2
INS_NW(1,2)_REV– 06/10/13 PAGE 19