Mitsubishi Electric MELSEC iQ-R Series User Manual page 95

9.
Set "Network Configuration Settings" in the "CC-Link IE TSN Configuration" window.
[Navigation window]  [Parameter]  [Module Information]  [RJ71GN11-SX]  [Basic Settings]  [Network
Configuration Settings]
10.
Click the [Close with Reflecting the Setting] button to close the "CC-Link IE TSN Configuration" window.
11.
Set "Refresh Settings" as follows.
[Navigation window]  [Parameter]  [Module Information]  [RJ71GN11-SX]  [Basic Settings]  [Refresh Setting]
12.
Click the [Apply] button.
13.
Write the set parameters to the CPU module on the master station. Then, reset the CPU module or power off and on the
system.
[Online]  [Write to PLC]
In this example, default values are used for parameters that are not shown above. For the parameters, refer to
the following.
 MELSEC iQ-R CC-Link IE TSN User's Manual (Application)
8 COMMUNICATION EXAMPLES
8.2 RJ71GN11-SX Communication Example
8
93