Brother DCP-1510 Service Manual page 191

1.3.22 1.3.22 Print mainte Print maintenance inform
<Function> <Function>
This function is used to print the maintenance information, such as the remaining amount of This function is used to print the maintenance information, such as the remaining amount of
consumables, number of replacements, and counter values (refer to the next page consumables, number of replacements, and counter values (refer to the
<Operating Procedure> <Operating Procedure>
(1 (1) ) Nu
(2) Printi (2)
DCP-15** series, MFC-18** series DCP-15** series, MFC-18** series
nance information (function
Nume meri ric ke c key pa y pad mo d mode dels ls
Press the [7] button twice in the initial state of maintenance mode. Press the [7] button twice in the initial state of maintenance mode.
Non-numeric key pad models Non-numeric key pad models
Pres Pr ess th s the [ e [ ] or [ [ ] or ] butt tton t ] bu
[OK] button. [OK] button.
Printing mainten ng maintenance info ance information st
to the initial state of maintenance mode. to the initial state of maintenance mode.
Print pattern Print pattern
4-40 4-40
ation (function code: 77) code: 77)
on to di o disp spla lay "M y "MAI AINTE NTENA NANC
rmation starts. Whe arts. When printin n printing is complete
next page). ).
NCE 77 E 77" on " on th the LC e LCD an D and pr d pres
g is completed, the machin d, the machine returns
Confidential Confidential
ess th s the e
e returns