Brother DCP-1510 Service Manual page 155

1.3.2 1.3.2 Print wh Print white lev
(function code: 05) (function code: 05)
<Function> <Function>
This function is used to print the contrast level data for document scanning compensation. This function is used to print the contrast level data for document scanning compensation.
<Operating Procedure> <Operating Procedure>
Note: Note:
• • Be sure not to pe
(1) For monoc (1)
(2 (2) ) Nu
(3) "PRINT (3)
(4) When prin (4)
ite level / black le el / black level dat
Be sure not to perform this ope rform this operating proce
but after performing the document scanning operation at least once. The machine initializes but after performing the document scanning operation at least once. The machine initializes
the contrast level data and obtains the standard value for document scanning compensation the contrast level data and obtains the standard value for document scanning compensation
at the start of scanning the document. Therefore, this function cannot be operated without at the start of scanning the document. Therefore, this function cannot be operated without
performing a document scanning operation. performing a document scanning operation.
The print result varies depending on whether color scanning or monochrome scanning is The print result varies depending on whether color scanning or monochrome scanning is
performed immediately before this operating procedure. Check the contrast level data you performed immediately before this operating procedure. Check the contrast level data you
want to print and then implement the procedure below. want to print and then implement the procedure below.
For monochrome sc hrome scanning anning, make a mono
scanning, scan the document in color mode. scanning, scan the document in color mode.
Nume meri ric ke c key pa y pad mo d mode dels ls
Press the [0] and [5] buttons in this order in the initial state of maintenance mode. Press the [0] and [5] buttons in this order in the initial state of maintenance mode.
Non-numeric key pad models Non-numeric key pad models
Pr Pres ess th s the [ e [ ] or [ [ ] or ] butt tton t ] bu
[OK] button. [OK] button.
"PRINTING" is disp ING" is displayed on the LC layed on the LCD, and the contra
compensation is printed. compensation is printed.
Note: Note:
• • When there is no pa When there is no paper in the pape per in the paper tray
When printing is compl ting is completed, the mac eted, the machine retu
4-4 4-4
vel data for docu a for document s ment scann
rating procedure immed dure immediately after the p
, make a monochrome c chrome copy of the doc
on to di o disp spla lay "M y "MAI AINTE NTENA NANC
D, and the contrast level dat
r tray, printing is c , printing is cancell
hine returns to the initia rns to the initial state of mai
canning com ing compensa pensation tion
iately after the power is turned O ower is turned ON, N,
opy of the document. Fo ument. For color r color
NCE 05 E 05" on " on th the LC e LCD an D and pr d pres
st level data for docume a for document scannin
ancelled. ed.
l state of maintenan ntenance mode.
Confidential Confidential
ess th s the e
nt scanning g
ce mode.