Brother DCP-1510 Service Manual page 14

POWER CORD SAFETY: POWER CORD SAFETY:
• • Use onl
• • DO NOT allow an
• • DO NOT plac
• • Brother st
• • DO NOT put a toner car
• • DO NOT use
DO NOT attempt to operate this product with a paper jam or with stray pieces of paper DO NOT attempt to operate this product with a paper jam or with stray pieces of paper
inside the product. Prolonged contact of the inside the product. Prolonged contact of the paper with the fuser unit could cause
DO NOT use a vacuum cleaner to clean up scattered DO NOT use a vacuum cleane
the toner dust to ignite inside the vacuum cleaner, potentially starting a fire. Please the toner dust to ignite inside the vacuum cleaner, potentially starting a fire. Please
carefully clean the toner dust with a dry, lint-free soft cloth and dispose of it carefully clean the toner
to local regulations. to local regulations.
After you have just used the product, some internal parts of the product will be After you have just used the product, some internal parts of the product will be
extremely hot. Wait at least 15 minutes for the product to cool down before you touch extremely hot. Wait at least 15 minutes for the product to cool down before you touch
the internal parts of the product. the internal parts of the product.
Use only the power c y the power cord suppl ord supplied with t
DO NOT allow anything to res ything to rest on the power cord. DO N
where people can walk on the cord. where people can walk on the cord.
DO NOT place this produc e this product in a position whe
otherwise put on the cord. Doing so may cause the cord to become worn or frayed. otherwise put on the cord. Doing so may cause the cord to become worn or frayed.
Brother strongly rec rongly recommends th ommends that you DO NOT advi
DO NOT put a toner cartridge and dr tridge and drum unit asse
resulting in injuries. resulting in injuries.
DO NOT use flammable substances, any flammable substances, any type of spray
containing alcohol or ammonia to clean the inside or outside of the product. Doing containing alcohol or ammonia to clean the inside or outside of the product. Doing
so could cause a fire so could cause a fire or electrical shock. Instead, use or electrical shock. Instead, use only a dry, lint-free cloth.
dust with a dry, lint-free soft cloth and dispose of it according
HOT SURFACE HOT SURFACE
ied with this produ his product. ct.
t on the power cord. DO NOT place thi
t in a position where the cord is str re the cord is stretched or stra
at you DO NOT advise using an exte
um unit assembly into a fire mbly into a fire. It could explo
type of spray, or an organic
paper with the fuser unit could cause a fire.
r to clean up scattered toner. Doing this might cause toner. Doing this might cause
viii viii
OT place this product s product
etched or strain is in is
se using an extension cor nsion cord. d.
. It could explode,
, or an organic solvent/liquid solvent/liquid
only a dry, lint-free cloth.
a fire.
according
de,
Confidential Confidential